|
|
YARNprocessing |
|
|
Type CH Hollow Spindle Creel |
||
|
This
Sheet |
Related Datasheets |
|
|
STABEL
hollow spindle creel system NCH is a simple yet highly effective design.
Manufactured to meet demands of modern warpers, the
NCH ensures the creel is not the limiting factor in your warping section. |
||
w Rapid re-creel due to easy accessible packages
w Compact footprint w Control of High twist yarn w Gentle Tension at high speed w 150mm to 350mm spacing w 3kg to 10kg packages w Accuracy at the Warper w Consistency at the Warper w Ideal for Weft
Creel |
|
|
Type
NCTU Hollow Spindle and Creel Tensioner Unit
The NCTU unit
is used in our creels, but also available individually. The yarn path created
by the innovative Hollow Spindle and Double Adjustable Tensioner
brings many benefits to any creel configuration. |
||||
|
|
|
STABEL HOLLOW SPINDLE for w Reduced
balloon (allows increased speeds).
w ‘Ballon’ adjust on assembly. w High twist tolerance & good yarn control. w Easy accessible packages allows quick
re-creel w Suitable for use with any spindle. |
||
|
|
||||
|
STABEL DOUBLE ADJUSTABLE CREEL TENSIONERS for w
Metal/ceramic construction for strength & long life
w
Dual Cymbal size for balloon damping. w Path adjust primary tension control. w Weight adjust for extra tension control. w Path set by ratchet; Path lock if
required. w Alternative cymbol
mounts for fixed path. w Protected from ‘Lasso’ The NCTU can be bought either assembled as an NCH
creel or as a stand alone unit. |
|
|
||
Further
information at www.stabel.co.uk
|
STABEL OSWESTRY
|