** High Speed: High Twist tolerance; Good Yarn Control.
** Quick re-creeling due to easy accessible packages.
** Configuration - from minimal weft creels to large, single or double
sided warping/weaving creels
** Up to 10kg per spindle.
** Optional Swivel magazine pegs (Type CM).
** On-line heat setting.
** Induce elasticity in polyamides.
** Relaxes and improves surface finish.
** Induces controlled preshrinkage.
** Rigid yarn positive feed reduces wear on shed and weaving motions.
** Elastomeric yarn at constant tension for fabric at constant extension.
** Standard unit adjustable 1000gm - 30,000 gm across the sheet.
** Eliminates variation from beam to beam, empty to full and batch to batch.
** Digital feed at precise speed or servo controlled via tension sensor.
**
Ideal for beam and creel fed looms.
** New build or retrofit.
** Tension control motion removes stress from weaving mechanism.
** Accurate traversing with narrow sheet-rope or sheet fabric.
**
Touch screen control.
** Both sides able to wind elastomerics under constant tension.
** Independent sheet and traverse control.
** One or both side of this unit can be also configured for spooling and blocking.
** Available with touch screen control.
**
Accurate traversing for blocking or spooling.
** Both sides able to wind elastomerics under constant tension.
** Auxiliary motor allows both heads to be independent.
** Blocking up to 250m/min.
** 0.37KW double fan for top blower and rear suction
** Removable collection bag
** Maximum air movement past healds for removal of 'fly'
**
Variable speed Control (without stopping) to +/- 10rpm; tipping; smooth start; quick stop
** Preset & programmable speeds and ramps
** NGD-Datalog of yarn break, stop, weaving speed, efficiency, hours, meters etc
NL - Beam Lift and Transport Unit
** Single operator load back Beam Creel and transport of difficult rubber beams; safe lift; no fatigue
** Roll on - Roll off fork lift empty
and full beams at all levels; motorised lift and lower
** Trolley docks accurately with RR Positive Drive unit
** Rigid yarn positive feed reduces wear on shed and weaving motions
** Elastomeric yarn at constant tension for fabric at constant extension
** Standard unit adjustable 1000gm - 30,000 gm across the sheet
** Eliminates variation from beam to beam, empty to full and batch to batch
** Constant tension adjustable for hard or soft rolls; no crushing at core
** Peripheral drive
** Woven tapes deflected for 'In-line' collection when 'Double' weaving
